How to Apply a Small Car Sticker
If you’re like many do-it-yourselfers, you enjoy taking care of things yourself instead of having it done for you by a professional. Customizing the exterior of your vehicle and enhancing the paint job used to be something that only professionals could do accurately. However, technology has made it possible for you to customize your own vehicle with the invention of car stickers.
All you need to do is choose the stickers that you want to used form the many options available and with the help of the instructions below, you can put your own car stickers on your vehicle with precision.
How to apply small car stickers to your vehicle:
- Gather together all of the tools needed to do the installation. The recommended tools are cleaners, paper towels, squeegee, masking tape and a measuring tape.
- Decide where you want to put the car sticker and use the measuring tape to center it correctly. Clean this area well making sure there is no dust, grim or wax on the area and that it’s completely dry before moving to the next step.
- Place the car sticker on the desired location and use the masking tape to hold in place. Tear off two strips of the tape and place one on each side of the sticker taping it to the vehicle creating a hinge with the tape.
- Now, lift the bottom of the sticker upward until you can peel the backing off of it leaving the adhesive exposed.
- Gently lower the sticker back down to the vehicle with the adhesive touching the area but don’t press at this time.
- Use a squeegee, driver’s license or credit card to smooth out the sticker. Start pressing in the center of the car sticker and work outward smoothing out all the air bubbles as you go.
- The last step is to remove the clear transfer tape by gently pulling it off at an angle leaving the car sticker in place. The masking tape can be moved at this time as well.
- It’s recommended that you install the stickers when the temperature is between fifty and ninety degrees. Extreme heat or cold can make installation more difficult.
The instructions for applying car stickers, decals and window stickers are basically the same. However, when applying larger stickers, you’ll need to tape it in place and then cut it into sections in order to make it easier to apply. Be careful not to cut into the design.
If you’re interested in car warps or very large designs, you may want to consider using a professional. A big job such as these will be very time consuming and a lot more difficult to get that professional look.
About the Author
Check out Sticker City today for more information about car stickers and installation instructions.
Apply Install Large Vinyl Bed Decal Stripe Graphic – Dry Method